EasyManua.ls Logo

Tone TOUCH 03 - General Instruction

Default Icon
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
General instruction
04
This appliance can be used exclusively by skilled professionals. Avoid the use of this appliance by children or
unqualified persons.
This machine shall be destined exclusively to the use it has been expressly designed for. Any other use shall be
considered ill-suited and improper. The manufacturer shall not be considered responsible for any damages
caused by improper use.
Children shall be supervised and never allowed to play with the appliance.
Children shall be never allowed to clean or maintenance the appliance.
The electric safety of the machine is achieved only when the machine is correctly connected to a grounded
electric system.
The user shall arrange electric, water and draining systems in a suitable position to allow correct machine
installation.
The installer of TONE devices is not responsible for making modifications to existing water and power
connections in the customers facilities.
If the electric supply cable is damaged, it must be replaced by another cable
provided by the manufacturer or by its Technical Service.
For good machine functioning and maintenance, it is mandatory to install a water softener in order to avoid scale
formation. This must be evaluated by the installer and the user shall leave a space for the correct
installation of a water softener, following the instructions contained in its manual.
The machine shall be placed on a surface guaranteeing secure support. The machine must be connected
exclusively to an appropriate cold drinking water source, in compliance with national norms and rules.
The pressure of the incoming water must be between 1.5bar and 3bar. If this requirement is not met, consult the
manufacturer.
A shut-o tap must be installed between machine water hose and water system to block water flow in case of
necessity.
Do not use water jet devices in the area where TONE 03 is installed!
Do NOT tilt TONE 03 during operation! Max. tilt angle < 5°.
Only to be operated by trained personnel!

Other manuals for Tone TOUCH 03