To Next PageTo Next Page
Need help?Do you have a question about the Tool Shop 240-2077 and is the answer not in the manual?
General| Brand | Tool Shop |
|---|---|
| Model | 240-2077 |
| Category | Saw |
| Type | Circular Saw |
| Power Source | Corded Electric |
| Voltage | 120V |
| Blade Diameter | 7-1/4 inches |
| Max Cutting Depth at 45° | 1-3/4 inches |
| Blade Size | 7-1/4 inches |
Instructions to save the manual for safety, operation, and warranty reference.
Covers work area, environment, children, grounding, insulation, shock, cord use, extension cords, moisture, gauge, storage, tool forcing, right tool, dress.
Covers eye protection, securing work, reach, tool maintenance, starting, keys, switch operation, unplugging, alertness, damaged parts, replacement parts, service.
Instructions for securing the workpiece using the hold-down clamp for safe and accurate cuts.
Steps for initial setup, connecting power, unlocking, and starting the saw safely.
Procedure to ensure the miter angle is set correctly using a combination square and fence.
Steps to adjust the fence for proper blade contact with a square.
Steps to align the bevel angle to 0 degrees using adjustment screws and indicators.
Procedure to ensure the blade is at the correct 45° bevel angle and contacts the stop screw.
Details the warranty coverage, exclusions, and purchaser rights for the miter saw.
