EasyManua.ls Logo

Tool Shop 61832 - Proper Storage Procedures; Use Correct Outdoor Extension Cords; Pay Attention to Air Hose Connections; Do Not Point Tool at Self or Others

Tool Shop 61832
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
Figure 1
13.STORE THE TOOL. When not in use, tool should be cleaned, fully assembled and then, stored in a dry
location to reduce rust. For safety, keep out of reach of children.
14.OUTDOORS EXTENSION CORDS. When air compressor is used outdoors, use only rounded
jackets extensions cords intended for outside use. See manufacturers manual for the AWG required for
the compressors amperage draw.
15.PAY ATTENTION TO AIR HOSE AND THEIR CONNEATIONS. Dont trip over hoses. Make
sure all connections are tight.
16.AFTER LOADING THE FASTENERS. never point the tool at yourself or bystanders.
17.USE THE CORRECT AIR CONNECTOR. The connector on the tool must not hold pressure when
the air supply is disconnected. If the wrong fitting is used, the tool can be charged with air after being
disconnected and still be able to drive a fastener.
18.WHEN CONNECTING THE AIR. The tool may possibly fire the fasteners as soon as you plug it in to
air hose. Therefore, remove all the fasteners before connecting to the air.
19.DO NOT DEPRESS THE SAFE BRACKET AND THE TRIGGER WHEN LOADING.
20.IF THE FASTENERS ARE JAMMED. Disconnect the tool from the air and remove the jammed
fasteners out.
WARNING: The warning, caution, and instructions explained in this instruction manual cannot
cover all possible conditions and situations that may occur. It must be understood by the opera-
tor that COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT
INTO THIS PRODUCT, BUT MUST BE SUPPLIED BY THE OPERATOR.
UNPACKING
When unpacking, check and make sure that all the accessories are included. If anyone is missed or
broken, please call seller for help. Refer to the follow lists.
Description
Nailer
S3 Hex Key
S4 Hex Key
Air Tool Oil
Operating instruction
Qty
1
1
1
1
1
SETTING
Your air tool is fully assembly when you receive it. Before using it, attach the air line and desired air system
accessories. See Figure 1 for the recommended accessories and connection order. Be sure the air hose is
depressurized when installing or removing adapters to the air line.
NAILER
QUICK
CONNECTOR
OILER FILTER
AIR SUPPLY
REGULATOR
AIR HOSE

Related product manuals