Applied Diamond Tools
18102 Chesterfield Airport Rd, Unit O
Chesterfield, MO 63005
Phone: 636-537-5888 Toll Free: 800-980-7808
Fax: 800-758-9968
Email: sales@applieddiamondtools.com
8. Lay the machine flat and use the hex wrench to tighten the three screws on
the collar
9. Use the open-end wrench to install the other two back holders.
10. Wrap the Splash guard around the perimeter of the polisher using the Velcro
and install the Vacuum hose.
11. The machine is now ready to be used!
to tighten the three
screws.
two back holders
To Next Page