18
MAINTENANCE INFORMATION
If scheduled maintenance is NOT carried out then this
will void your warranty. Use the Service Log on page 21
to keep track of the regular servicing. Ensure that the
authorised service agent has dated, signed and stamped
this log to ensure your warranty is not void.
SPARK PLUG (PIC. 19)
Spark plug should be checked every 50 hours (operation)
or every 3 months and replaced every 100 hours
(operation) or every 6 months, which ever occurs first or
whenever considered necessary.
1. Unplug the spark plug lead off the spark plug.
2. To clean use a wire brush/nail file and remove the
carbon deposits on spark plug base.
3. Check the spark plug gap using a feeler gauge. The
gap should be 0.7mm~0.8mm (0.028”~ 0.031”).
4. The replacement spark plug is LD E6TC or
NGK BP6HS.
AIR FILTER (PIC. 20)
Air filter should be checked daily and cleaned or replaced
every 25 hours of operation or every 3 months whichever
occurs first or whenever considered necessary.
To Replace the Air Filter
1. Remove the air filter cover by unscrewing the top and
bottom screws.
2. Using a clean soft cloth wipe all dust and debris from
the air filter box and air filter cover.
3. Replace the foam filter.
4. Replace the air filter cover by locating it in position
using the two screws to tighten.
To Clean the Filter
1. Remove the foam filter.
2. Shake foam filter to get the excess dust and debris
off.
3. Using a foam filter cleaner thoroughly clean the foam
filter, follow the instruction on the bottle.
4. Place somewhere clean to air dry.
5. Once dry it is time to oil, you can either use a foam
filter oil or a mineral oil.
6. Cover the foam filter in a little oil and thoroughly work
the oil through the entire foam filter.
7. Squeeze out the excess oil.
8. Filter is now ready to re-use.
PIC. 19
PIC. 20
To Next Page
Loading...