EasyManua.ls Logo

Top RC Model Beechcraft Bonanza A36 - User Manual

Default Icon
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Assembly Instructions
Before commencing assembly, pleass read instruction thoroughly
Beechcraft Bonanza V35/A36
A36ST/A36UP Technical data:
Specification:
Wingspan: 1280mm
Length: 1030mm
Weight: 1384g / 1442g
Configuration
Radio: 6CHanneL 2.4G radio
Motor: 3715 980KV
ESC: 30A / 50A
Battery: 11.1V 2200mA 20C lipo / 14.8V 2200mA 20C lipo
Servo: 9g * 1PCS + 17g * 3PCS / 9g * 2PCS + 17g * 3PCS
Charger: 3S lipo balancer and adapter / 4S lipo balancer
and 3A adapter
Propeller: 1070 3blades
V35ST/V35UP Technical data:
Specification:
Wingspan: 1280mm
Length: 1030mm
Weight: 1384g / 1442g
Configuration
Radio: 6CHanneL 2.4G radio
Motor: 3715 980KV
ESC: 30A / 50A
Battery: 11.1V 2200mA 20C lipo / 14.8V 2200mA 20C lipo
Servo: 9g * 1PCS + 17g * 3PCS / 9g * 2PCS + 17g * 3PCS
Charger: 3S lipo balancer and adapter / 4S lipo balancer
and 3A adapter
Propeller: 1070 3blades
Question and Answer IconNeed help?

Do you have a question about the Top RC Model Beechcraft Bonanza A36 and is the answer not in the manual?

Summary

Safety, Disclaimer, and Technical Data

General Safety Precautions

General safety guidelines for operating the RC model, emphasizing user responsibility.

Disclaimer

Manufacturer's limitation of liability concerning product use and potential damages.

Battery and Charging Safety

Essential procedures and warnings for safe handling and charging of Lipo batteries.

Flying Environment Safety

Guidelines on safe flying locations and conditions, avoiding hazardous environments.

Center of Gravity (CG)

Importance and setting of the correct center of gravity for stable flight.

Tools Required for Assembly

Listing of necessary tools for assembling the RC model components.

Component Assembly: Main Wing and Tail

Component Identification

Overview of the model's main parts and included accessories before assembly.

Aileron and Flaps Servo Horn Installation

Step-by-step guide for attaching servo horns to control surfaces.

Main Wing Servos and Control Wire Assembly

Attaching servos, protectors, clevises, and control wires to the main wing.

Main Landing Gear and Tail Assembly

Mounting the main landing gear and assembling the tail section components.

Tail Wing Assembly (Rudder;Elevator)

Installing adjustable horns, rudder, and elevator to the fuselage tail.

Model Assembly: Specific Variants and Systems

A36 Elevator and Rudder Control Systems

Assembly and connection of servos and control wires for A36 elevator/rudder.

V35 V-Tail Assembly and Controls

Gluing, fitting horns, and installing the V-tail and its control system.

Motor, Landing Gear, and Cowl Installation

Mounting the motor, front landing gear, steering servo, and cowl.

Propeller and Main Wing Final Assembly

Attaching the propeller assembly and securing the main wings.

Electronics Installation and Connection

Connecting receiver, transmitter battery, and flight battery to ESC.

Optional Float Assembly and Final Connections

Water Float Assembly Steps

Assembling float servo, control rods, and float frames.

Float Installation to Fuselage

Mounting the assembled floats to the underside of the aircraft fuselage.

Circuit Connection Graph

Visual guide detailing electrical connections for all model components.

Top RC Model Beechcraft Bonanza A36 Specifications

General IconGeneral
BrandTop RC Model
ModelBeechcraft Bonanza A36
CategoryToy
LanguageEnglish

Related product manuals