Need help?Do you have a question about the Top RC Model F-16 Fighting Falcon and is the answer not in the manual?
General| Type | RC Jet |
|---|---|
| Wingspan | 700 mm |
| Material | EPO Foam |
| Remote Control Frequency | 2.4GHz |
| Recommended Age | 14+ |
| Skill Level | Intermediate |
| EDF Diameter | 64 mm |
| Category | Toy |
| Product Name | Top RC Model F-16 Fighting Falcon |
| Motor | Brushless Motor |
| Battery | 11.1V LiPo |
| Recommended Battery | 11.1V LiPo |
| Channels | 6 |
Important safety guidelines for operating the R/C airplane model, including warnings for minors.
List of essential components like radio, batteries, and turbine for the model airplane.
Essential tools such as knives, screwdrivers, and pliers needed for building the model.
Key preparatory actions including reading the manual and checking parts before assembly.
Comprehensive list of parts including screws, bolts, tubes, and fairings for the F-16 model.
Specific accessories required for servo installation and control linkage.
Parts list for the main and nose landing gear systems, including screws and bushes.
Instructions for mounting servos, connecting horns to ailerons, and securing linkages.
Securing the missile rail and attaching wing carbon fiber bars.
Attaching the assembled wing to the aircraft fuselage, routing servo lines.
Mounting the servo for the horizontal stabilizer and ensuring smooth movement.
Assembling the horizontal stabilizer to the aircraft fuselage with screws.
Installing the vertical fin servo and attaching the tail fuselage servo cover.
Gluing vertical aluminum tubes to the vertical fin and attaching the fin to the fuselage.
Securing the fuse fairing to the fuselage from the inside using nuts and wrenches.
Attaching the tail pipe and installing the fiber exhaust into the tail fuselage.
List of accessories required for the plane nose assembly, including screws and bushes.
Assembling the nose frame to the fuselage using screws and nuts.
Installing the retract system components, including gear door servos and linkages.
Assembling the main landing gear and wheels to the appropriate position on the fuselage.
Ensuring the landing gear can be completely put down and retracted.
Installing the nose gear into the fuselage and assembling it securely.
Assembling fuel tanks to the fuselage and connecting the main and nose fuselage sections.
Installing the remaining two fuel tanks into the main fuselage.
Adjusting control surface travel (aileron, rudder, elevator) for optimal flight.
Verifying the correct Center of Gravity position is crucial before flying.
To Next Page
