Top RC Model Beechcraft Bonanza V35 User Manual

Assembly Instructions
Before commencing assembly, pleass read instruction thoroughly
Beechcraft Bonanza V35/A36
A36ST/A36UP Technical data:
Specification:
Wingspan: 1280mm
Length: 1030mm
Weight: 1384g / 1442g
Configuration
Radio: 6CHanneL 2.4G radio
Motor: 3715 980KV
ESC: 30A / 50A
Battery: 11.1V 2200mA 20C lipo / 14.8V 2200mA 20C lipo
Servo: 9g * 1PCS + 17g * 3PCS / 9g * 2PCS + 17g * 3PCS
Charger: 3S lipo balancer and adapter / 4S lipo balancer
and 3A adapter
Propeller: 1070 3blades
V35ST/V35UP Technical data:
Specification:
Wingspan: 1280mm
Length: 1030mm
Weight: 1384g / 1442g
Configuration
Radio: 6CHanneL 2.4G radio
Motor: 3715 980KV
ESC: 30A / 50A
Battery: 11.1V 2200mA 20C lipo / 14.8V 2200mA 20C lipo
Servo: 9g * 1PCS + 17g * 3PCS / 9g * 2PCS + 17g * 3PCS
Charger: 3S lipo balancer and adapter / 4S lipo balancer
and 3A adapter
Propeller: 1070 3blades

Top RC Model Beechcraft Bonanza V35 Specifications

General

Servos	6 x 9g servos
Material	EPO foam
ESC	60A
Radio	6-channel
Battery	14.8V 2600mAh LiPo

Summary

Model Technical Data

A36ST/A36UP Specifications and Configuration

Detailed technical specifications and configuration parameters for the A36ST/A36UP model.

V35ST/V35UP Specifications and Configuration

Detailed technical specifications and configuration parameters for the V35ST/V35UP model.

Important Safety and Disclaimer Information

General Safety Precautions

Crucial safety warnings and operational guidelines for users of the RC model.

Disclaimer of Liability

Manufacturer's statement on user responsibility and limitations of liability.

Battery and Charging Safety

Precautions for safe handling and charging of batteries to prevent hazards.

Center of Gravity Guidance

CG Setting Range

Specification of the correct Center of Gravity (CG) range for optimal flight stability.

Tail Wing Assembly and Linkage (A36)

Adjustable Tail Horns Setup

Control Surface Servo Installation (A36)

Elevator/Steering Servo Mounting (A36)

Elevator/Rudder Control Linkage (A36)

V-Tail Assembly and Installation (V35)

V-Tail Components Assembly

V-Tail Servo and Linkage Setup (V35)

V-Tail Servo Mounting (V35)

Motor, Landing Gear, and Cowl Installation

Motor and Front Landing Gear Mounting

Instructions for installing the motor and the front landing gear.

Steering Servo and Cowl Fitting

Propeller, Main Wing, and Canopy Finishing

Propeller and Spinner Attachment

Main Wing Joining and Fuselage Attachment

Receiver and Power System Setup

Receiver Wiring and Mounting

Instructions for connecting all wires to the receiver and securing it.

Transmitter Battery and Controls Check

Steps for installing the transmitter battery and verifying control system functionality.

Flight Battery Connection and Canopy Installation

Procedure for connecting the flight battery and re-installing the canopy.

Circuit Connection Diagram

ESC, Receiver, and Servo Wiring

Schematic illustrating the electrical connections between the ESC, receiver, battery, and servos.