10
HOW TO USE
INSTALLATION OF DEVICE
Make sure that the loaded device is set at the specified position.
Refer to each setup manual for details on connecting the cable wiring.
OPERATION
To operate this adjustable instrument table smoothly, follow the procedure outlined below.
1 Turn the main switch off.
2 Insert the power cord into the specified outlet.
3 Turn the main switch on.
4 Let the patient sit down at the center of the loaded instrument table.
5 Set the table to the proper height with the up-and-down switch according to the patient's posture.
The table moves up and down by pressing the up-and-down switch.
WARNING
If smoke comes from this adjustable instrument table, immediately turn
off the power switch (main switch) and remove the
power plug from the outlet. If you keep operating the table without solv-
ing this problem, a fire may occur. Ask your dealer to repair it.
WARNING
Connect the power plug to the 3-core AC outlet (with grounding). If the
table is not grounded and an electric leak occurrs, a fire or electric shock
may result.
CAUTION
Don't put your fingers between the movable units when the main unit is
in use. Your fingers may become caught, causing an injury
POWER
Main switch
Up-and-down switch
To Next Page
Loading...
