18
MAINTENANCE AND INSPECTION
Consumable part table
CLEANING
Cleaning of the external cover
1 When the external cover or the operation panel are dirty, wipe them with a dry cloth.
2 When the external cover is extremely dirty, dissolve a tableware neutral cleanser in tepid water
and dampen a cloth with the water/cleanser solution. Wring the cloth tightly and wipe the exter-
nal cover with it.
PERIOD OF USE AND DISPOSITION
Period of use
8 years only when regular maintenance and inspection are done (according to self-certification [Topcon
data]).
Disposition
Dispose of the adjustable instrument table according to your local government's laws regarding dispo-
sition and recycling.
Part name Type
Consumable part
Fuse 5A-125V Bel Fuse Inc.
Fuse 10A-125V Bel Fuse Inc.
GSA 125V-5A-N
GSA 125V-10A-N
CAUTION
To prevent electric shock, do not remove the cover. Ask the service per-
sonnel to repair your adjustable instrument table.
NOTE
• Do not wipe the plastic section of the adjustable instrument table with volatile
solvents, etc. If you wipe it with benzine, thinner, ether, gasoline, etc., discolor-
ation or deterioration may occur.
• Wipe the adjustable instrument table with a cloth dampened with tepid water or
tableware cleanser.
• Do not blow spray cleaner directly into this adjustable instrument table. The
spray cleaner may travel through a clearance around the switches and cause
electrical problems.
To Next Page
Loading...
