Topcon GX-45 - User Manual

GX-45 Console
SGR-1 Quick Setup Guide
Part Number AGA4117 Rev. 1.1
SGR-1 Antenna Software Setup
This quick setup guide is to be used in
conjunction with the System 110/150
Operator’s Manual P/N AGA3663
GX-45 Console SGR-1 Quick Setup Guide AGA4117 Rev 1.1
Select the GPS Correction
Select to access the GPS Settings screen. 1.
Select to access GPS Correction selection. 2.
Use the up and down arrows to select the correction system. 3.
Select to confirm your selection. 4.
Refer to the AGA3663 System 110/150 Operator’s manual
for more information on setting up the different correction
systems.

Summary

GX-45 Console SGR-1 Quick Setup Guide

SGR-1 Installation Procedure

Covers the procedures for installing the SGR-1 antenna and connecting it to the GX-45 console.

SGR-1 to GX-45 Installation Procedure

Details the physical connection process from the SGR-1 antenna to the GX-45 console.

SGR-1 Antenna Software Setup

Guides through the software configuration steps for the SGR-1 antenna.

Select the GPS Receiver

Instructions on choosing the SGR-1 as the GPS receiver in the system settings.

Select the GPS Correction

Steps to configure the GPS correction system type for optimal accuracy.

Topcon GX-45 Specifications

General

Antenna Type	Choke ring
Operating Temperature	-40°C to +85°C
Type	GNSS Antenna
Polarization	RHCP
Impedance	50 Ω
Connector Type	TNC
GNSS Signals Tracked	GPS, GLONASS, BeiDou, QZSS, SBAS