1 Notes and Warnings
2 General Information
Attention!
This description is not a substitution for the con-
cerned product’s documentation. Please do read
the documentation including the manuals care-
fully before dealing with this product. If the safety
instructions in the documentation are not followed
dangerous situation can occur that can result in
damages, injuries and/or death by high voltage
or wrong handling. In case you do not have the
correct documentation you can order it by con-
tacting dl-opus-info@topcon.com. Only properly
trained personnel with the correct qualification are
allowed to handle the device.
Attention!
Do not open the housing to avoid danger to high
voltages. Before touching the electric assemblies
make sure that the electricity is switched off com-
pletely. If the front pane is broken the device needs
to be taken out of service due to risk of injury. If per-
ceivable damages on the device exist that can com-
promise the functionality, it must be taken out of
service due to the danger of malfunctions. These
particularly include damages to the LCD display,
damages to the keyboard, damages that compro-
mise the protection level and damages to the en-
coder knobs.
Please note:
All content is subject to change without notice.
Errors and omissions excepted.
Mounting and Handling
1. Do not use the cable as a handle to carry the
device.
2. Mounting in clean working environment only.
Dust and oil can harm the electric contacts and
compromise the functionality.
3. Do not mount the device under the use of vio-
lence because it can cause damage.
4. The device must be mounted by trained per-
sonnel only into especially designed and tested
systems.
5. The device must not be opened or disassembled.
6. The device is to be cleaned with a moist fuzz
free cotton cloth. If necessary a mild cleaning
agent can be used. Do not use acid or abrasive
cleaning agents.
7. The device is to be stored in a cool and dry
environment and to be protected against sun
shine.
8. If the environmental temperature is beneath
10°C the reaction time of the display increases.
Order Numbers
This documentation is valid for OPUS A3 order
numbers as follows:
OPUS Projektor
CoDeSys
ISO-VT
OPUSA3SN1CANF000 OPUSA3SN1CDSF000 OPUSA3SN1ISOF000
The neutral versions (N) will substitute the portrait (P) and landscape (L) versions.
To Next Page
Loading...
Need help?
General
