EasyManua.ls Logo

Topens ET24 - Page 2

Topens ET24
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
Important Note:
The open delay time of the 2 actuators must be set to more
than 4S if the electric lock is used with dual swing gate
opener which is powered by the DPS180-U AC-DC power
supply, or the gate opener would work improperly.
Electric lock improves the safety for your gate, and it is
highly recommended if you have animals or live in areas
affected by strong winds when the gate is longer than 1.5
meters (7ft).
Electric Lock Part List
Important Information:
1. Before you install the Electric Lock please be sure the gate is level,
moves freely, and does not bind or block against barriers.
2. On the Pull-to-Open installation, for the Electric Lock to work
properly, in order to ensure the lock engaging with the lock receiver
firmly, the limit switch B must be moved outward a little bit more than
the desired close position.
3. The Electric Lock must be installed on the outside of the gate if on the
Push-to-Open gate.
4. Due to the various mounting conditions, mounting hardware is not