Need help?Do you have a question about the Topens ET24 and is the answer not in the manual?
General| RFID Frequency | 125 kHz |
|---|---|
| Control Method | Remote control |
| Operating Temperature | -20°C to +50°C |
| Remote Control Range | 20-30 m |
| Unlock Mode | Remote |
| Operating Humidity | 80% |
Disengage opener clutch and determine best lock/receiver location.
Mounting instructions for metallic tube and chain link gates.
Recheck lock position and alignment for proper operation.
Connect the electric lock's power cables to the E-Plus board or control board.
Disengage opener clutches and determine best lock/receiver location.
Mounting instructions for metallic tube and chain link gates.
Recheck lock position and alignment for proper operation.
Connect the electric lock's power cables to the E-Plus board or control board.
Connect the E-Lock using the E-Plus board for A&AD&PW series openers.
Wire the E-Lock directly to the "LOCK" terminal for KD902 & AT1202 openers.
To Next Page