Topens TC186R User Manual

C030271 1 VER21a
User Manual of the WiFi Surveillance Camera
Built-in Remote Control (Model: TC186R)
1. Specifications
 Pixel and resolution: 2M pixel (1080P)
 Network connection: WiFi or Ethernet
 Sensor and lens: CMOS, 6mm
 Night vision mode: ICR infrared filter type
 Night vision distance: 15m
2. Installation of the APP
You can search “LinkCraft” in Google Play or iOS APP store to download & install the
APP.
3. Installation of the Micro SD card
The camera supports an optional Micro SD card which storage could be up to
maximum 128GB. You can install the Micro SD card to recording the monitoring video
in the local card. You can find 4 screws on the bottom cover. Loosen the 4 screws and
you’ll find a card slot. Insert the Micro SD card into the card slot and then fix the little
plate back to the bottom cover to complete installation.
NOTE: The Micro SD card will record the monitor video after about 5 minutes when it’s
installed into the camera at the first time.

Topens TC186R Specifications

General

Brand	Topens
Model	TC186R
Category	Security Camera
Language	English

Summary

Specifications

Installation of the APP

Installation of the Micro SD card

How to Add the Camera to the Android Phone

Registering a LinkCraft Account

Steps to create a new user account in the LinkCraft app, including verification code input.

WiFi Network Readiness

Camera Power and Status Indicator

Initiating Camera Addition in App

Entering WiFi Configuration

Accessing the WiFi setup screen to rename the camera and input network details.

Confirming Binding Success

Viewing Camera Feed

How to Add the Camera to the iOS Phone

Camera Indicator Behavior (iOS)

Initiating Camera Addition (iOS)

Connecting to Camera WiFi (iOS)

Selecting the camera's wireless network in phone settings for the initial connection.

WiFi Password Entry (iOS)

Inputting the WiFi password for the camera after connecting to its network.

Network Configuration on iOS

Steps for configuring the WiFi network on an iOS device for the camera.

Binding Device and Connection

How to Program the Camera to the Gate Opener

Entering Monitor Display

Gate Opener Programming

Process of programming the camera to the gate opener's control board.