1
1.2 Controlling the digital receiver 3
1.2.1 Front panel
The front panel of the digital receiver has buttons to control
the digital receiver, specific lights and a display to indicate its
status. The following indicates what they mean.
button switches the digital receiver between standby mode
and active mode.
VOLUME −, + buttons decrease or increase the volume. They
are also used to change values for menu options.
CHANNEL −, + buttons switch to the previous or next ser-
vice. They are also used to navigate in menus and in-
teractive screens.
Front display shows the current time in standby mode, and
displays the current service in active mode.
There is a USB port on the front panel for
firmware update and data transfer.
To Next Page
Loading...
