14 | P a g e
Pre-Drive Safety Check
Get to know the feel of your Mobility Scooter and its capabilities. We recommend that you perform a
safety check before each use to make sure your scooter operates smoothly and safely.
Perform the following inspections prior to using your scooter:
Check for proper tyre inflation. Maintain but do not exceed the psi/bar/kPa air pressure rating
indicated on each tyre.
Check all electrical connections. Make sure they are secure and not corroded.
Check all harness connections. Make sure they are secured properly.
Check the brakes.
Check the battery charge.
If you discover a problem, contact your authorised dealer for assistance.
Tyre Inflation
Your scooter is equipped with pneumatic tyres. Check the tyre pressure at least once a week. Proper inflation
pressures will prolong the life of your tyres and help ensure smooth operation.
WARNING! It is critically important that the psi/bar/kPa air pressure is maintained at all times. (Generally, these
should be Front 25 & Rear 30psi) Do not under-inflate or over-inflate your tyres. Under-inflation may result in
loss of control, and over-inflation may burst the tyre.
WARNING! Inflate your scooter tyres from a regulated air source with an attached pressure gauge.
To Next Page
Loading...
