EasyManua.ls Logo

TopGun Mobility AVENGER - BATTERY CHARGING PROCEDURES; BATTERY CHARGING STEPS

Default Icon
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31 | P a g e
Battery Charging
Please ensure you read this section of your Owner’s Manual prior to use. These instructions are written based on you using
the charger supplied with your Mobility Scooter.
To ensure the best performance and maximum battery life, we recommend frequent battery charging. Your Scooter comes
with an external battery charger for your ease and convenience. The console battery display makes charging simple and
easy. It is recommended that you charge your scooter every night.
1) The console battery level display has red lights; each indicates 10% of battery charge. This acts like an automobile
fuel gauge.
2) On a level, dry surface, turn off the power key and plug the extension cord into the charger socket located on the
steering console. Then plug the other end of the charger cord into a wall outlet.
3) Charge the battery for 6-8 hours depending on the usage before charging. Disconnect the charger from the wall
outlet, disconnect the extension cord from the scooter, insert key into tiller and check if all gauge lights are on.
There is no possible way to overcharge the battery as the charging voltage is set constant. In general, you may start
charging before you go to bed at night and disconnect it in the next morning.

Related product manuals