TOPP ACK4 Series User Manual

5.7- EMERGENCYPROCEDURES
Should it be necessary to open the window manually due to power supply failure or
mechanism block, follow these instructions:
Act on the pin "P" until it is completely extracted from the bracket "S1" (top hung
windows - ). Act on the pin "P" until it is completely extracted from the bracket
"S3" (bottom hung windows - );
Open the window manually.
BEFORE PERFORMING ANY TYPE OF INTERVENTION ON THE ACTUATOR AND ON THE
WINDOW, IT IS COMPULSORY TO DISCONNECT THE POWER SUPPLY OF THE
ACTUATOR AND TO PUT ON "0" THE EVENTUAL SWITCHES OF THE CONTROL
DEVICES.
IT IS COMPULSORY TO PADLOCK THE MAIN SWITCH OF THE DISCONNECTION DEVICE
INSTALLED ON THE MAINS IN ORDER TO AVOIDANY UNEXPECTED START. IF THE MAIN
SWITCH CANNOT BE PADLOCKED, IT IS COMPULSORY TO PLACE A SIGN FORBIDDING
THE ENABLING.
1)
Fig.10
Fig.11
2)
19
INSTALLATION -5
ACK4
S1
P
Fig.10
P
S3
Fig.11
INSTALLATION AND USE ISTRUCTIONS
VER.1.0
REV.11.05

TOPP ACK4 Series Specifications

General

Brand	TOPP
Model	ACK4 Series
Category	Controller
Language	English