TOPP TF44 - User Manual

BEFORE INSTALLING AND USING THE DEVICE, IT IS COMPULSORY FOR
THE INSTALLER AND THE USER TO READ AND UNDERSTAND
THIS MANUAL IN ALL ITS PARTS.
THIS MANUAL IS INTEGRAL PART OF THE DEVICE
AND MUST BE PRESERVED FOR FUTURE
REFERENCE UNTIL DEMOLITION OF THE SAME.
TF21/24R/T
TF41/44R/T
INSTALLATION AND USE INSTRUCTIONS
FEEDING AND CONTROL UNIT
FOR 24VDC / 230VAC MOTORS
P/N 8P5021
VER.1.0 REV.07.04

TOPP TF44 Specifications

General

Motor power supply	24 V DC
Operating temperature	-20°C to +55°C
Protection class	IP20
Number of Outputs	2
Protection	Electronic overload protection

Summary

GENERAL REMARKS

GENERAL INSTRUCTIONS

INSTALLER AND USER RESPONSIBILITIES

TECHNICAL DESCRIPTION

RATING PLATE AND CE MARKING

TECHNICAL DATA

Lists key technical specifications, including voltage, current, power, and connectivity.

DESTINATION OF USE

USE LIMITS AND PROHIBITIONS

SAFETY

PROTECTIONS AGAINST ELECTRIC HAZARD

Describes measures implemented to protect against electrical shock from direct/indirect contact.

RESIDUAL RISKS AND MITIGATION

Identifies potential residual risks (e.g., crushing) and adopted safety measures.

INSTALLATION

GENERAL INSTALLATION INSTRUCTIONS

Covers prerequisites for competent personnel, actuator installation, and device placement.

INSTALLATION OF THE SENSORS

INSTALLATION OF THE POWER SUPPLY UNIT

Step-by-step instructions for mounting the unit, including drilling and wiring.

AUTOMATIC OPERATION WITH PREDEFINED LOGIC

PROGRAMMING OF REMOTE ELECTRONIC CONTROL MOD. F33

Instructions for enabling and managing 433 MHz radio controls for the device.

PROGRAMMING RESET

ELECTRICAL CONNECTIONS

Covers mains connection requirements, cable sizing, and safety devices.

USE AND OPERATION

USE OF THE DEVICE