TOPP TF41R - User Manual

BEFORE INSTALLING AND USING THE DEVICE, IT IS COMPULSORY FOR
THE INSTALLER AND THE USER TO READ AND UNDERSTAND
THIS MANUAL IN ALL ITS PARTS.
THIS MANUAL IS INTEGRAL PART OF THE DEVICE
AND MUST BE PRESERVED FOR FUTURE
REFERENCE UNTIL DEMOLITION OF THE SAME.
TF21/24R/T
TF41/44R/T
INSTALLATION AND USE INSTRUCTIONS
FEEDING AND CONTROL UNIT
FOR 24VDC / 230VAC MOTORS
P/N 8P5021
VER.1.0 REV.07.04

TOPP TF41R Specifications

General

Motor voltage	24 Vdc
Protection class	IP20
Output Voltage	24 Vdc
Operating temperature	-10°C to +50°C
Storage Temperature	-20°C to +70°C

Summary

TECHNICAL DESCRIPTION

TECHNICAL DATA

DESTINATION OF USE

USE LIMITS

SAFETY

PROTECTIONS AGAINST ELECTRIC HAZARD

Details the measures adopted to protect against electric hazards from direct and indirect contacts.

RESIDUAL RISKS

INSTALLATION

GENERAL INSTALLATION INSTRUCTIONS

Emphasizes competent personnel, correct actuator installation, and suitable device placement.

INSTALLATION OF THE SENSORS

INSTALLATION OF THE POWER SUPPLY UNIT

Step-by-step guide for mounting the feeding unit, including drilling and wiring preparation.

TRIPPING OF THE SENSORS

AUTOMATIC OPERATION LOGIC

SENSOR CALIBRATION AND CONFIGURATION

CONTROL MODE PROGRAMMING

PROGRAMMING REMOTE CONTROLS

ELECTRICAL CONNECTIONS

Provides essential guidelines and warnings for safe and compliant electrical connections.

WIRING DIAGRAMS

Illustrates the wiring connections for the TF21 model, including component mapping.

WIRING DIAGRAMS FOR TF24

Illustrates the wiring connections for the TF24 model, showing motor and sensor hookups.

WIRING DIAGRAMS FOR TF41

Illustrates the wiring connections for the TF41 model, including various input/output terminals.

WIRING DIAGRAMS FOR TF44

Illustrates the wiring connections for the TF44 model, detailing motor and sensor interfaces.

USE AND OPERATION

USE OF THE DEVICE

Explains how the feeding unit should be used by the user according to manual instructions.