9
TF21/44R/T
3.5- USE LIMITS
3.6- PACKAGE
The device has been designed and manufactured exclusively for the destination of use
given in par.3.4, therefore, any other type of use is strictly forbidden in order to assure
in any moment the safety of the installer and of the user, as well as the efficiency of the
device itself.
IT IS STRICTLY FORBIDDEN TO USE THE DEVICE FOR IMPROPER USES, DIFFERING
FROM THE ONE FORESEEN BY THE MANUFACTURER (SEE PAR.3.4).
IT IS STRICTLY FORBIDDEN TO INSTALL THE DEVICE ON THE EXTERNAL SIDE OF THE
ROOM SUBJECT TO ATMOSPHERIC AGENTS (RAIN, SNOW, ETC.).
THE USE OF THE DEVICE IN ENVIRONMENTS WITH POTENTIALLY EXPLOSIVE
ATMOSPHERE IS STRICTLY FORBIDDEN.
IT IS COMPULSORY TO KEEP THE PACKAGE AND THE DEVICE OUT OF REACH OF
CHILDREN.
Each standard package of the product (cardboard box) contains:
• No. 1 Feeding and control unit for 24VDC/230VAC motors;
• No. 3 Fairleads (ø 6) for connection cables;
• No. 1 Package with dowels and fastening screws;
• No. 1 433 MHZ Radio control (only for mod. TF21R, TF24R, TF41R and TF44R);
• No. 1 Infrared remote control (only for mod. TF21T, TF24T, TF41T and TF44T);
• No. 1 Installation and use instructions.
MAKE SURE THAT THE ABOVE DESCRIBED COMPONENTS ARE CONTAINED IN THE
PACKAGE, AS WELL AS THAT THE DEVICE HAS NOT BEEN DAMAGED DURING
TRANSPORT.
SHOULD ANY ANOMALY BE DETECTED, IT IS FORBIDDEN TO INSTALL THE DEVICE,
AND IT IS COMPULSORY TO REQUIRE TECHNICAL ASSISTANCE FROM YOUR DEALER
OR THE MANUFACTURER.
THE PACKAGING (PAPER, PLASTIC, ETC.) HAS TO BE DISPOSED ACCORDING TO THE
LAWS IN FORCE.
EX
INSTALLATION AND USE INSTRUCTIONS
TECHNICAL DESCRIPTION -3
VER.1.0
REV.07.04
To Next Page
Loading...