TOPTEK TOPVERT L1 Series - Operation and Control; Control Panel and Functions

TOPVERT L1 Series
E- 7
DC 0~10V voltage signal. when switch to “I” can accept
DC 4(0)~20mA current signal.
operation frequency)
[ACM]
The reference point of analog inputs and outputs signal.
The reference of reference voltage source.
These terminals are isolated from DCM terminals
serial port
(Use the shielded twisted-pair cables to prevent operating faults)
[SG+] RS-485 serial port +
[SG-] RS-485 serial port -
[ ]:Option
Description of the Digital Keypad
Multi-Function Operating Explanations
ITEM Function
Multi-Function input (MI1、MI2)
Multi-Function setting:
1. Factory default 2.Customer assign
Running command (FWD、REV) Forward/Stop、Reverse/Stop
Relay I/O(R1A、R1B、R1C)
Multi-Function setting:
1. Factory default 2.Customer assign
PU port(Key pad input) Connecting with key pad (PU-01 AND PU-05)
POWER
Power indicator
RUN
Running indicator
FAULT
Fault indicator