Step 5: Connectthe newHIDbulbto the
plug, and then install it into the assembly,
pay attentionto alignthepositimingslot
when installing; If assem$' space is
limited, you can installthe bulb before
connectingthe plug;
Step 6: Fasten the bulb in place by
turning it clockwise;
Step 3: Locate the HID bulb, and
unplug the ballast. You may need
to turn the plug counterclockwise
and pull it out;
Step 4: Open the spring fastener,
and take out the bulb;
Step 7: Close the back cover and dose the Engine Hood, then you are done
2. Models: D2S/D4S
arouTubeI HIDD2SHEADLIGHTBULBINSTALLATION
Step 1: Parking your car, and make sure the headlights are tumed off for
more than half an hour to avoid burns;
Step 2: Open the hood, locate the bulb that needs to be replaced, and
remove the back cover (the ballast and the cover are one piece for most
vehicle models), which you may need to rotate or pull out;
5
Step 5: Install the new HID bulb Step 6: Connect bulb and plug and
into the assembly and secure it with rotate clockwise to fix it;
a spring fastener;
Step 7: Close the back cover and close the Engine Hood,then you are done
6
To Next Page
Loading...