The TorcUP TX-1 Unrivaled design. Unbelievable reliability.
Uncommon features like the patented “peanut-shaped” piston, inline reaction pad,
and flat design from cylinder to link. Easy to find in any tool room.
Announcing the TorcUP TX-1
PSI Ft/Lbs
1,000 67
2,000 120
3,000 176
4,000 237
5,000 296
6,000 353
7,000 412
8,000 470
9,000 527
10,000 584
PSI Ft/Lbs
1,000 50
2,000 94
3,000 137
4,000 184
5,000 230
6,000 275
7,000 320
8,000 366
9,000 410
10,000 455
Nose Radius
Tightest nose radius in the industry. Fits applications
where clearance constraints make other tools too bulky.
Dual Independent Whip Hoses
Allows for unlimited / individual movement
of duplex hoses.
Hex Link Cassettes
Steel alignment pins connect lower reaction area
for added strength.
Quick Connect Couplers
Each tool is fitted with quick connect, no-drip,
thread less safety couplers, with 4:1 safety ratio.
Cylinder and Link Material
Both cylinder and link are manufactured from
4340 Aircraft high strength steel alloy.
Link Pin
One pin for link to cylinder engagement - no tool
required for swapping ratchet links.
While we hate to admit it,
sometimes size does matter.
IN STOCK!
AVAILABLE NOW!
Series TX-1 Low Profile Hydraulic Torque Wrenches are designed for installing and removing small / hard to access
bolts that have minimal wrench clearance. This tool can be found at offshore platforms, power plants, steel erection
sites and many other locations requiring precise high torque bolt makeup and maximum torque for bolt breakdown.
TorcUP, Inc. * 1025 Conroy Place, Easton PA 18040 Phone: 610-250-5800 Fax: 610-250-2700
Toll Free: 888-TORCUP-1 (867-2871) Web:www.torcup.com E-mail:sales@torcup.com
Disclaimer: Please consult the calibration torque chart specific to your purchase or rental tool.
For Links 1 3/16”- 1 5/8”
(30mm - 41mm)
For Links 1/2”- 1 1/8”
(17mm - 27mm)
To Next Page
Loading...
