Need help?Do you have a question about the Tork DZS400BP and is the answer not in the manual?
Steps for physically installing the time switch unit into its enclosure.
National Electrical Code requirements for continuous grounding and proper electrical contact.
Procedure to set the current hour and minutes for the time switch clock.
Procedure to change existing clock settings for hour and minutes.
Procedure to set the current month, date, and year for the time switch.
Procedure to change existing month, date, and year settings.
Setting or modifying Daylight Saving Time (DST) preferences for automatic adjustments.
Configuring up to four different season durations by entering start and end dates.
Entering specific dates for individual holidays to affect scheduling.
Navigating and setting specific holiday schedules and dates.
Configuring signal durations for each channel of the time switch.
Setting ON/OFF times, days, holidays, and seasons for schedules.
Configuring astronomical settings for sunset and sunrise based on latitude.
Displaying current time, day, and scheduled holiday or season status.
Manually overriding scheduled events for channels in run mode.
Setting specific ON/OFF times for schedule events using hour and minute inputs.
Assigning specific days, holidays, or seasons to schedule entries.
Configuring the unit for astronomical ON/OFF times based on sunset/sunrise.
Choosing specific days, holidays, or seasons for astronomical time settings.
Setting automatic ON at sunset and specific time OFF for astronomical operation.
Setting specific time ON and automatic OFF at sunset for operations.
General| Amperage Rating | 20 A |
|---|---|
| Poles | Single Pole |
| Power over Ethernet (PoE) | No |
| Mounting | Wall Mount |
| Ports | Not Applicable |
To Next Page
