Tork Matic - User Manual

Tork Matic
®
Hand Towel
Dispenser - Recessed
Stainless Steel
Distributeur de serviettes à
mains Matic - Encastré
Acier inoxydable
Dispensador de toallas de
mano Matic - Incorporado
Acero Inoxidable
www.torkusa.com

Summary

Installation Guidance

Installation Alert

Important notices regarding product installation modifications.

Safety Precautions

Essential safety measures to be taken during installation.

Installation Instructions

Step 1: Prepare for Mounting

Initial preparation for mounting the dispenser unit.

Step 2: Attach Mounting Bracket

Securing the mounting bracket to the wall structure.

Step 3: Secure Mounting Bracket

Finalizing the attachment of the mounting bracket.

Step 4: Attach Dispenser Body

Connecting the main dispenser unit to the bracket.

Step 5: Position Dispenser

Placing the dispenser at the recommended height.

Step 6: Confirm Installation Height

Ensuring the dispenser is installed at 48" (120cm).

Step 7: Align with Wall Opening

Aligning the dispenser with the existing wall recess.

Step 8: Insert into Wall

Sliding the dispenser into the recessed wall opening.

Step 9: Secure Dispenser

Fastening the dispenser to the wall with screws.

Step 10: Open Dispenser Door

Step 11: Engage Locking Mechanism

Step 12: Insert Paper Roll Core

Step 13: Secure Paper Roll Core

Step 14: Lock Paper Roll Core

Step 15: Load Paper Roll

Step 16: Engage Paper Mechanism

Step 17: Adjust Paper Feed

Step 18: Final Paper Feed Adjustment

Step 19: Secure Paper Feed

Step 20: Final Dispenser State

Loading and Operating Instructions

Step 1: Load Paper Roll

Step 2: Position Paper Roll

Step 3: Advance Paper

Step 4: Final Loaded State

Step 5: Load Second Paper Roll

Step 6: Position Second Roll

Step 7: Advance Second Paper

Step 8: Dispense Paper

Step 9: Dispense Paper (Repeat)

Tork Matic Specifications

General

Material	Plastic
Installation	Wall mounted
System	H1 - Hand Towel Roll System
Width	33.7 cm
Height	36 cm
Depth	203 mm
Type	Hand Towel Roll Dispenser