To Next PageTo Next Page
Need help?Do you have a question about the Tork Matic H1 and is the answer not in the manual?
Details the H1 Matic system features and specifications.
Provides the physical dimensions of the H1 Matic dispenser in inches and centimeters.
Lists available Tork roll towel product options compatible with the H1 dispenser.
Lists dispenser parts with their corresponding replacement SKUs for ordering.
Lists internal cassette components with their corresponding replacement SKUs.
Step-by-step instructions for replacing the dispenser's elevation lock.
Detailed steps for removing and installing the H1 Matic cassette.
Instructions on how to open the cassette cover to access internal parts.
Instructions for removing and attaching a spring to a fitting hole and plastic pin.
Instructions for replacing the spring for the cutting cylinder, noting color coding.
Detailed steps for replacing the plastic pinion gear with a metal one.
Instructions for replacing the protection roll, ensuring proper placement of fitting pins.
Steps for removing and installing the dispenser cover, including retaining bushings.
Visual guide illustrating the correct steps for loading paper into the dispenser.
Explains how to use the stub roll compartment for 100% roll usage.
Recommended steps for cleaning the dispenser to remove dust and maintain its surface.
Addresses issues where paper is not visible, checking loading and jams.
Troubleshoots incomplete cutting by checking specific springs.
Guides on replacing the cassette/mechanism for non-functioning dispensers.
Provides contact details for Essity Quality Coordinator and product date code info.
Shows the location of date code clocks engraved in the dispenser backplate.
Illustrates the mounting hole dimensions for the Elevation Matic dispenser.
Specifies the recommended mounting height for standard access.
Details ADAAG requirements for lavatories and sinks, including dispenser placement.
Specifies unobstructed and obstructed forward reach dimensions from the floor.
Specifies unobstructed and obstructed side reach dimensions from the floor.
Details requirements for operable parts, including force and hand operation.
Specifies limits for protruding objects in circulation paths.
Describes semi-recessing the dispenser using a specific filler panel.
Lists related technical data sheets for further information.
General
