To Next PageTo Next Page
Need help?Do you have a question about the Tork B3 System and is the answer not in the manual?
Identifies the Tork Elevation B3 DoorMate Waste Bin, B3 System, and its specific model numbers.
Provides the physical dimensions of the dispenser in inches and centimeters.
Lists the part number for Tork Advanced DoorMate Tissue for disposal of T3 products.
Details the components and tools included for the dispenser installation.
Illustrates the initial phase of mounting the dispenser, including template use.
Shows the first step in emptying the waste bin, involving lifting the inner contents.
Depicts the process of taking out the waste liner from the dispenser.
Illustrates the final action of closing the dispenser after emptying.
Continues the waste disposal process with steps 4-7 and specifies the required bag size of 10" x 14".
Specifies recommended heights (10" and 38") for ADA compliant mounting of the dispenser.
Illustrates the initial steps for ADA compliant installation, including marking and drilling.
Details the process of attaching and securing the main dispenser body using screws.
Shows the first step of positioning the dispenser correctly for bag installation.
Illustrates opening the dispenser lid to access the interior for bag placement.
Details the process of securing the installed bag within the dispenser.
Visually compares T3 and B3 dispenser systems, showing mounting heights and brand.
General
