Page 1
Tormach Inc.
1071 Uniek Drive, Waunakee, WI 53597
Phone: 608.849.8381 / Fax: 209.885.4534
©Tormach® 2011. All rights reserved.
Specicaons subject to change without noce.
TD10407_PCNC770_Stand_0216A
PCNC 770 Stand Assembly
Product Idencaon: PCNC 770 Machine Stand (PN 31191)
Purpose: This document details the assembly of the PCNC 770 stand.
Qty.
PCNC 770 Machine Stand PN
1
Stand
—
1
Stainless Steel Wear Guard
—
2
M6 Nut
—
8
M12 Flat Washer
—
4
M12 Spring Washer
—
4
Foot 35259
4
Spacer 32092
4
M12 x 50 mm Screw
—
2
M6 x 20 mm Screw
—
12
M6 x 10 mm Screw
—
1
Adjusting Rod
—
12
M6 Washer
—
4
M5 x 10 mm Screw
—
1
Left Chip Pan
—
1
Right Chip Pan
—
2
Key for Stand
—
1
Butyl Tape 34428
4
M12 Threaded Stud 32648
4
M12 Nut —
NOTE: If any of these items are missing, contact Tormach
Customer Service at (608) 849-8381 for a replacement.
NOTE: Discard 12 M6 Flat Washers included with PCNC 770 Machine Stand. Butyl tape replaces these items.