To Next PageTo Next Page
Need help?Do you have a question about the Tormach PCNC 1100 and is the answer not in the manual?
Essential warnings, precautions, and guidance for safe mill operation.
Hazards and precautions related to electrical shock and proper grounding.
Critical electrical specifications, grounding, and safety for mill installation.
Step-by-step guide for the fundamental mill setup process.
Methods for manually moving the mill axes.
Managing tool and work offsets for machining.
Introduction to the G-code language and its syntax.
Detailed descriptions of supported G-codes and their usage.
Scheduled maintenance tasks and intervals.
Procedures for maintaining original factory precision.
Essential warnings, precautions, and guidance for safe mill operation.
Hazards and precautions related to electrical shock and proper grounding.
Critical electrical specifications, grounding, and safety for mill installation.
Step-by-step guide for the fundamental mill setup process.
Methods for manually moving the mill axes.
Managing tool and work offsets for machining.
Introduction to the G-code language and its syntax.
Detailed descriptions of supported G-codes and their usage.
Scheduled maintenance tasks and intervals.
Procedures for maintaining original factory precision.
General| Spindle Speed | 100 - 5140 RPM |
|---|---|
| Spindle Taper | R8 |
| Machine Type | CNC Mill |
| X Travel | 18.0 in (457 mm) |
| Y Travel | 9.5 inches |
| Z Travel | 16.25 inches |
| Spindle Motor | 1.5 hp |
| Voltage | 220 VAC, Single Phase |
| Table Size | 34.0 in x 9.5 in (864 mm x 241 mm) |
