Need help?Do you have a question about the Tornado HI-FAN-24MOWF-WR-1P and is the answer not in the manual?
General| Model | HI-FAN-24MOWF-WR-1P |
|---|---|
| Category | Fan |
| Brand | Tornado |
| Size | 24 inch |
| Blade Size | 24 inch |
| Voltage | 220-240V |
| Speed Settings | 3 |
| Oscillation | Yes |
| Material | Metal |
| Type | Wall Fan |
| Color | White |
Use GFCI protected receptacles and ensure proper grounding for shock prevention.
Do not use with damaged cord or plug; ensure adequate electrical system.
Avoid solid-state speed control devices to prevent fire or electric shock hazards.
Do not submerge motor in water or expose to water to avoid personal injury or death.
Mount on 12-inch thick dry/cement walls or 4x5 inch wood studs/joists.
Use 9/32" drill bit and 1/4"-20 hex screws/nuts for steel surface mounting.
Use 1/4" expansion bolts or lag screws with shields for masonry mounting.
Adjust oscillation by loosening and tightening the thumb screw on the rod.
Loosen pivot nut and position nut to adjust tilt angle, then fix.
Operate upright, plug into 120V AC/60Hz outlet, ensure tight connection.
Clean with damp cloth, do not immerse in water. Motor sealed, no lubrication needed.
Warrants product free of defects for 12 months from purchase date.
Excludes damage from misuse, tampering, modification, or failure to maintain.
Product may expose to chemicals known to cause cancer or birth defects.
To Next Page
