44
Theme Server field. This option should be enabled if this device is bind to a service provider.
Remote Font Server* This field is used to store the location of the remote font package for the
device. If this device is bind to a service provider this filed should point to the providers server IP (for example
Voice Master, VODWare or CMS box). The font should be made and located as follows:
Location:
/home/manager/upload/crm/homa.tar.bz2
Inside the tar.bz2 file the structure should be:
srvfont/
srvfont/fontname.ttf
srvfont/VERSION
Where the VERSION file should contain the font version for example 1
The font should be configured both on the M55 and the Server side:
M55:
1. Navigate to Master Console >> Streaming Services and configure an existing account PIN.
2. Navigate to Master Console >> System Management and configure Remote Font Server =
192.168.1.112(use the server IP) and check the option Use Remote Font.
Server side:
Navigate to Master Console >> Content Management >> Content Plan >> set the option Font File
Location = homa.tar.bz2 and the Font File Version to 1
Debug Server IP This is the IP of the debug server that will accept all debug messages that
are spooled from the device. The debug server IP is used to collect all debug messages from the device.
Debug Server Port This is the Listening Port of the Debug Server that will collect the debug
information send from the device.
RS-232 Monitor Protocol This option allows a RS-323 interface to be enabled for control of external
TV monitor using serial cable.
Content-Length Verification* This option is used to allow verification of external file downloads based
on content-length parameter provided by the remote HTTP server.
Enforce Server Menu* This option allows the server menu to take precedence over the locally
stored menu items. Used to remotely provision and manage TV interface layout.
System GUI* This option is used to allow the system GIU to be displayed during the boot
up process.
To Next Page
Loading...
Need help?
General