55
Video Services Management
Video Encoder Bitrate* This option is used to define the video encoding bitrate in kbps for
camera streaming.
Auto Reconnect This function will make the device to reconnect if the connection
between the device and the server fails.
Quick Tune The selection is used to allow different switching for selected
objects. For example, to automatically switch to object once selected select “Enable”. If the switch has to
be done after the press of “OK” then select “Disable”
Quick Index Dial The selection is used to allow direct channel selection by entering
the channel numerical ID. The ID is the first column in the channel list for IPTV, VOD, PPV, Radio, AOD
media objects.
Buffering Time This is the buffering time in seconds. Buffering is required for all
TCP connection to ensure the good quality of the reception even in bad network conditions.
Enable Subtitles This function will enable subtitle support if the provider of the
service sends subtitles for the selected channel.
Subtitle Font Size This function allows management of the subtitle font size.
Subtitle Display Method This function manages the subtitle display method. The default is
OSD.
Seek Type This parameter is used to allow seek type using User Objects or
indexed Video on Demand objects. If “Continuous” is selected then the seek will be done by pressing a
forward/backward key open time and the seek will continue until the end of file is reached, while if
“Once” is selected the seek will be done in a single jump every time the forward/backward button is
pressed.
Seek Time Interval This is the interval in second that will be jumped once the
forward/backward button is pressed.
Video/Audio Layout Type This is the layout type selected. The device default layout is list but
can be switched to Mosaic for more graphical representation.
Camera Management Section*
Motion Detection* This option is used to enable camera output only if there is a
motion detected by the camera.
Insert Date* This parameter will insert the date/time stamp in the camera output.
Sub-Node Management Section – The section defined the Sub-Node management. Sub-Node is usually
To Next Page
Loading...
Need help?
General