95
TIMER – this is the channel duration
INDEX – this is the index name that allows easy selection with the remote control
TYPE – this is the channel type. Default is “iptv”.
RECORDING_STATE – this is the recording flag for the channel 1: Enabled, 0:Disabled.
RATING – this is the object rating. Adult rated films “X” rating will require parental password.
COST – this is the cost of the object. “0.00” for Free objects. Example: “1.00 USD”
IMAGE_URL – this is the image of the object
If a particular field is empty it should be replaced by a space “ “.
Example channel listing:
TV1 | |
|http://192.168.0.206:8000/cgi-bin/strm.cgi?run=wsub&obj_id=46&p=5&mac=$MAC
| | |46 |IPTV |0 | G| 1.00USD| http://image_url1 |
TV2 | |
|http://192.168.0.206:8000/cgi-bin/strm.cgi?run=wsub&obj_id=47&p=5&mac=$MAC
| | |47 |IPTV |0 | G| 0.00USD|http://image_url2 |
TV3 | |
|http://192.168.0.206:8000/cgi-bin/strm.cgi?run=wsub&obj_id=48&p=5&mac=$MAC
| | |48 |IPTV |0 | NR| 0.00USD| http://image_url3 |
The variables in the channel location allow the STB device to send information to the server. For example,
the variable “$MAC” will allow the STB to send its MAC address to the server for authentication
purposes.
In addition the “Media Config URL” file can contain EPG (Electronic Program Guide) information in the
following format:
LIST_ID |OBJECT_ID |TYPE |CODEC |LOCATION |INDEX |START_TIME |END_TIME |TITLE
|RECORD_STATE |DURATION |COST |RATING |YEAR |GENRE |ARTIST |DESCRIPTION
|LOGO_URL|SAVE_STATE |GENRE_ID |
The following fields are NO_USED they are just for compatibility reasons to match the original EPG
structure that is returned by the Content Management Server.
RECORD_STATE,RATING,YEAR,GENRE,ARTIST,LOGO_URL,SAVE_STATE,GENRE_ID
Example:
9000 |9000 |PROGRAM | |192.168.0.11|9000 |25 Feb 2013 12:49 |25 Feb 2013 14:26 |Tomb
Raider@1600kbps |0 |5784 |2.00USD |R |2004 |Drama |Angelina Jolie |Tomb Rider- The Movie
To Next Page
Loading...
Need help?
General