What to do if the vacuum motor runs but there's poor suction in my Tornado Floor Machine?
If the vacuum motor runs but suction is poor on your Tornado Floor Machine, first, remove any debris from the vacuum shoe or suction hose. Also, ensure that the recovery tank isn't too full; if it is, drain it.
How to troubleshoot no power on a Tornado Marathon 1200?
If your Tornado Floor Machine has no power and nothing works, start by plugging in the cord. Then, check for any loose wiring.
What to do if the brush does not rotate on my Tornado Marathon 1200?
If the brush on your Tornado Floor Machine isn't rotating, try resetting the circuit breaker and activating the brush switch. Also, check for loose wiring.
Why vacuum motor will not run on my Tornado Marathon 1200?
If the vacuum motor on your Tornado Floor Machine won't run, first activate the vacuum switch. Then, check for loose wiring.
How to fix poor water spray on a Tornado Floor Machine?
If your Tornado Floor Machine has poor water spray, the spray jets might be clogged. Remove and clean the spray jets. Also, check the pump by removing the spray jets and checking the water flow.
Lists recommended cleaning chemicals for carpet extraction.
Explains proper grounding procedures for safe operation.
Outlines monthly checks and tasks for the machine.
Instructions for preventing freezing during storage below 40°F.
General| Speed | 175 RPM |
|---|---|
| Weight | 128 lbs |
| Pad Size | 20 inches |
| Power Cable | 50 ft |
| Cable Length | 50 ft |
| Power | 1.5 hp DC rectified |
| Brush Motor | 1.5 hp DC rectified |
To Next Page
