4
• Caution – This machine is for indoor use only and should not be used or stored outdoors or in wet
conditions.
• Warning – Should water emit from the machine exhaust, switch off immediately and refer to
instructions for “Using the Machine”.
Transporting the Machine
When transporting the machine ensure that all components, tanks and removable parts are securely
fastened, and that the supply cord and plug are not trailing. Detach hose and wand from machine for ease
of carriage.
Do not lift or transport the machine when it contains liquid, as it will add considerable weight.
Take extreme care when moving the machine up and down the stairs.
Caution – Incorrect lifting techniques may result in personal injury. We advice that the manual handling
regulations are followed.
Electrical Connection
• Before connecting the machine to the power supply, check that your supply voltage corresponds with
that marked on the rating label on the rear of the machine.
• IMPORTANT – If the supply cord is damaged, it must only be replaced by a special cord available
from the manufacturer or an authorized service agent.
Should an extension cord be used, ensure cord rating is adequate for the equipment. Do not use extension
cord in coiled condition as this could result in overheating of the cord.
Controls
1. Hose release catch
2. Vacuum hose
3. Solution outlet
4. Anti-foam tank
5. Solution pump switch
6. Vacuum switch
7. Machine cover
8. Removable solution tank
9. Removable recovery tank
10. Filters
To Next Page
Loading...
