29
Maintenance
Maintenance Procedure Maintenance Interval& Service
✝ Initial break in at 10 hours
‡ Initial break in at 50 hours
✝Replace the transaxle filter
Change the transaxle oil
Clean the transaxle strainer
Pack front wheel bearings (2-wheel drive)
Change the front differential oil (4-wheel drive)
Adjust valves
Replace spark plugs and check timing
Maintenance Schedule
Replace all interlock switches
Flush the cooling the cooling system and replace fluid
Change the brake fluid
Rep;lace the timing belt
Check front wheel alignment
Inspect service and parking brakes
Inspect fuel lines
Replace fuel filter
✝Check cable adjustments
✝Check alternator and fan belts
Service the air filter
Check front axle boot joint (4-wheel drive)
Check engine RPM (idle and full throttle)
✝Torque the wheel lug nuts
Lubricate all grease fittings
Inspect the condition and wear of the tires
Check front differential oil level (4-wheel drive)
‡Change engine oil and filter
Inspect cooling system hoses
Check governor oil level
Check battery fluid level/
cable connections
Every
400
hours
Every
800
hours
Every
200
hours
Every
100
hours
Every 50
hours
Minimum Recommended Maintenance Intervals
Annual Recommendations
Items are recommended every 1200 hours
or 2 years, whichever occurs first.
Replace the engine timing belt every 2,000
hours or 2 years, whichever comes first.
To Next Page
Loading...
