EasyManua.ls Logo

Toro 07213 - Check Brake Fluid

Toro 07213
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
Important When replacing tires, on the 4wd vehicle,
only use replacements approved for the Workman. Use of
tires not approved may cause turf damage or accelerated
drive train damage.
1
1.1
1.2
1.3
1.4
1.5
1.6
Maximum Total Front Axle Weight (lb.)
(thousands)
20” FRONT TIRES
8 10 12 14 14.7 16 18
20
Tire Pressure (p.s.i.)
1.7
1.9
2.1
23” EXTRA WIDE REAR TIRES
8101214151618
Tire Pressure (p.s.i.)
2.2
2.3
2.4
2.5
2
1.8
2.6
Maximum Total Rear Axle Weight (lb.)
(thousands)
Check Brake Fluid
The brake fluid reservoir is shipped from the factory filled
with “DOT 3” brake fluid. Check level before engine is
first started and every 8 hours or daily, thereafter.
1. Park machine on a level surface.
2. Fluid level should be up to FULL line on reservoir.
3. If fluid level is low, clean area around cap, remove
reservoir cap and fill to proper level. DO NOT
OVERFILL.
2
1
Figure 19
1. Brake fluid reservoir 2. Full line

Table of Contents