FormNo.3436-474RevA
JackMountKit
forTimeCutter
®
RidingMowers
ModelNo.140-2711
InstallationInstructions
Safety
SafetyandInstructional
Decals
Safetydecalsandinstructionsare
easilyvisibletotheoperatorandare
locatednearanyareaofpotential
danger.Replaceanydecalthatis
damagedormissing.
decal127-6663
127-6663
1.Warning—readthe
Operator'sManual.
2.Crushinghazard—engage
theparkingbrake,shutoff
theengine,andremove
thekey;supportthe
machineusingjackstands.
Installation
Determinetheleftandrightsidesofthemachinefrom
thenormaloperatingposition.
1.Parkthemachineonalevelsurface,disengage
theblade-controlswitch,andmovethe
motion-controlleversoutwardtothePARK
position.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Securethejackmounttotheframeontheleftof
themachineusing2self-tappingbolts(Figure1).
g307428
Figure1
1.Jackmount
2.Self-tappingbolt
4.Torquetheboltsto17to22N∙m(150to200
in-lb).
©2019—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3436-474*A
To Next Page
Need help?
General