Toro 140-2711 - User Manual

FormNo.3436-474RevA
JackMountKit
forTimeCutter
®
RidingMowers
ModelNo.140-2711
InstallationInstructions
Safety
SafetyandInstructional
Decals
Safetydecalsandinstructionsare
easilyvisibletotheoperatorandare
locatednearanyareaofpotential
danger.Replaceanydecalthatis
damagedormissing.
decal127-6663
127-6663
1.Warning—readthe
Operator'sManual.
2.Crushinghazard—engage
theparkingbrake,shutoff
theengine,andremove
thekey;supportthe
machineusingjackstands.
Installation
Determinetheleftandrightsidesofthemachinefrom
thenormaloperatingposition.
1.Parkthemachineonalevelsurface,disengage
theblade-controlswitch,andmovethe
motion-controlleversoutwardtothePARK
position.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Securethejackmounttotheframeontheleftof
themachineusing2self-tappingbolts(Figure1).
g307428
Figure1
1.Jackmount
2.Self-tappingbolt
4.Torquetheboltsto17to22N∙m(150to200
in-lb).
©2019—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3436-474*A

Toro 140-2711 Specifications

General

Brand	Toro
Model	140-2711
Category	Racks & Stands
Language	English

Summary

Safety Information

Instructional Decals

Safety decals and instructions are visible to the operator. Replace any damaged or missing decals.

Installation Procedure

Machine Preparation for Install

Park on level surface, disengage blade control, move levers to PARK. Shut off engine, remove key, wait for parts to stop.

Mounting the Jack Bracket

Secure the jack mount to the frame on the left using 2 self-tapping bolts.

Bolt Torque Specification

Torque the bolts to 17 to 22 N·m (150 to 200 in-lb) for secure mounting.

Jack Mount Operation

Safe Usage Guidelines

Provides instructions and warnings for operating the jack mount, including jack requirements and preventing fuel leaks.