TUFF TORQ TRANSAXLE
3 - 2 260 Series Tractor Service Manual
5. Loosen the hose clamp around the reservoir hose
and remove from the top of the transaxle. Clean
the area from around the hose before removing
(Figure 65).
Figure 65
MVC-324X
6. Unbolt the forward/reverse control rod. Note: This
tractor has cruise control and the forward/reverse
control rod is disconnected from the cruise plate
which is bolted to the control shaft assembly
(Figure 66).
Figure 66
MVC-325X
7. If the tractor is equipped with cruise control,
disconnect the plug and jack for the cruise control
magnet. Unbolt the cruise control magnet bracket
(Figure 67).
Figure 67
MVC-326X
8. Unhook the idler spring at the bolt and spacer
located on the right side of the frame (Figure 68).
Figure 68
MVC-327X
To Next Page
Loading...
