Part No. 93804SL Rev. E
Service Manual
Groundsmaster
®
455-D
This publication provides the service technician with
information for troubleshooting, testing, and repair of
major systems and components o n th e
Groundsmaster 455-D
REFER TO THE GROUNDSMASTER 455-D OPERA-
T
OR’S MANUAL FOR OPERATING, MAINTENANCE
AND ADJUSTMENT INSTRUCTIONS. Space is pro-
vided at the end of Chapter 2 in this publication to insert
the Operator’s Manuals and Parts Catalogs for your
machine. Replacement Operator’s Manuals are avail-
able by sending complete Model and Serial Number of
traction unit and cutting unit to:
The Toro Company
8111 Lyndale Avenue South
Minneapolis, MN 55420
The Toro Company reserves the right to change product
speci
fications or this publication without notice.
This safety symbol means DANGER, WARN-
ING, or CAUTION, PERSONAL SAFETY IN-
STRUCTION. When you see this symbol,
carefully read the instructions that follow.
Failure to obey the instructions may result in
personal injury.
NOTE: A NOTE will give general information about the
correct operation, maintenance, service, testing or re-
pair of the machine.
IMPORTANT: The IMPORTANT notice will give im-
portant instructions which must be followed to pre-
vent damage to systems or components on the
machine.
©
The Toro Company - 1993, 1996, 1998, 2002, 2003
To Next Page
Need help?
General
