Need help?Do you have a question about the Toro 30412 Groundsmaster 4000-D and is the answer not in the manual?
General| Transmission | Hydrostatic |
|---|---|
| Drive Type | 4WD |
| Number of Blades | 5 |
| Deck Lift | Hydraulic |
| Standard Tires | 26 x 12-12 |
Instructions from CEN, ISO, and ANSI standards for safe operation.
Toro-specific safety information, emphasizing hazards like amputations and thrown objects.
Explains the importance and location of safety decals on the machine.
Procedure for greasing the machine before operation for lubrication.
Guides the user to read manuals and training materials before operating the machine.
Operation of traction pedal, brake pedals, and parking brake latch.
Adjustment of tilt steering lever and operation of lift levers.
Key switch, PTO switch, speed limiter, and cruise control functions.
Engine oil, coolant, fuel gauges, and warning lights.
Important safety note about leaving the key in the ignition switch.
Procedure and interval for checking engine oil level and type.
Procedure for checking coolant level and adding coolant if necessary.
Guidelines for fuel types, grades, and tank capacity.
Step-by-step guide for starting and stopping the engine, including important notes.
Procedure to test safety interlock switches for proper operation.
Discussion of hydrostatic transmission characteristics and their impact on operation.
Recommendations for mowing conditions and height-of-cut settings.
Detailed schedule of maintenance tasks by service interval (hours).
Covers greasing bearings, bushings, and specific lubrication points.
Air cleaner servicing, engine oil/filter change, fuel system checks.
Battery care, fuse checks, planetary drive and rear axle lubrication.
Cooling system cleaning, brake adjustment, and belt servicing.
Throttle cable, traction linkage, hydraulic fluid, filters, and counterbalance adjustments.
Cutting unit pitch, castor bushings, blade checks, sharpening, and mismatch correction.
Procedure for clearing carbon buildup from the spark arrestor muffler.
Comprehensive guide for preparing the machine for seasonal storage.
Diagram of the machine's electrical system.
Diagram of the machine's hydraulic system.
Details the warranty coverage period and terms for commercial products.
How to contact Toro for warranty service and support.
Owner's duty to perform required maintenance and adjustments.
Lists product failures not covered by warranty, including wear and misuse.
States repair by authorized dealer as sole remedy and limits liability.
To Next Page