Need help?Do you have a question about the Toro Groundsmaster 328-D 30630 and is the answer not in the manual?
General| Cutting Width | 72 inches |
|---|---|
| Transmission | Hydrostatic |
| Number of Blades | 3 |
| Tire Size Front | 20x10-8 |
| Horsepower | 28 hp |
| Fuel Capacity | 12 gallons |
| Blade Tip Speed | 18, 000 ft/min |
Instructions from ANSI standard B71.4-1999 for safe operation.
Procedure for checking the engine oil level.
Steps for safely filling the fuel tank.
Guidance on checking the hydraulic system oil level and type.
Explanation of the traction pedal operation and speed control.
Operation of the power take-off lever.
How to operate the engine speed using the throttle.
Step-by-step guide for starting and stopping the engine.
Procedure for bleeding air from the fuel system.
How to check the operation of safety interlock switches.
Schedule outlining maintenance tasks based on operating hours.
List of daily checks to ensure proper operation and safety.
Detailed steps for servicing the air cleaner.
How to clean the air filter element.
Steps for changing the engine oil and oil filter.
Comprehensive guide to servicing the fuel system components.
Steps for replacing the fuel pre filter.
Procedure to ensure the traction drive is in neutral when controls are centered.
Steps for replacing the hydraulic oil filter.
Procedure for changing the hydraulic system oil and filter.
To Next Page