Need help?Do you have a question about the Toro GROUNDSMASTER 325-D and is the answer not in the manual?
General| Fuel Type | Diesel |
|---|---|
| Cutting Width | 72 inches |
| Number of Blades | 3 |
| Transmission | Hydrostatic |
| Drive | 2WD |
| Engine Power | 25 hp |
Locating model and serial numbers for correspondence and parts ordering.
Instructions and precautions for safe operation, including pre-operation checks.
Guidelines for operating the engine and mowing safely, including slope and fueling safety.
Details the sound power and pressure levels of the unit.
Specifies the vibration levels measured according to ISO standards.
Details engine, air cleaner, muffler, fuel system, and cooling system specifications.
Specifications for front axle, transmission, ground speed, tires, brakes, steering, and frame.
Information on interlock switches, instrument panel, PTO drive, and implement lift.
Provides approximate dimensions and curb weight for the machine.
Procedure for checking and maintaining engine oil level and recommendations.
Instructions for safely filling the fuel tank with appropriate diesel fuel.
Procedures for checking coolant and hydraulic system oil levels.
Operation of traction, turn, and brake pedals for machine movement and control.
Adjusting steering and operating lift lever and PTO lever.
Understanding gauges, oil pressure warnings, and key/glow plug switches.
Using throttle, managing electrical fuses, and adjusting the operator's seat.
Step-by-step procedure for starting and stopping the engine safely.
Procedure to remove air from the fuel system after maintenance or running out of fuel.
Procedure to verify the safety interlock systems are functioning correctly.
Guidelines for moving the unit and understanding its hydrostatic transmission.
Steps for cleaning, checking, and preparing the traction unit for storage.
Procedures for draining oil, fuel, and preparing the engine for storage.
To Next Page
