Need help?Do you have a question about the Toro Groundsmaster 360 Series and is the answer not in the manual?
General| Cutting Width | 72 inches |
|---|---|
| Deck Type | Side Discharge |
| Transmission | Hydrostatic |
| Turning Radius | 0 inches (0 cm) |
| Engine | Yanmar 3-cylinder diesel |
Machine design standards and general safety instructions for reducing injury potential.
Guidelines for training, preparation, and safe handling of fuels during operation.
Specific safety information for Toro products, including hazards and operational advice.
How to maintain sharp blades for clean cuts, prevent disease, and check for damage.
Table outlining maintenance tasks and their service intervals for optimal performance.
Warnings regarding ignition key safety and securing the mower deck with jack stands.
Procedure for checking lubricant level in the mower deck gearbox every 150 hours.
Steps for changing the mower deck gearbox lubricant every 400 hours or after first 50 hours.
Guidelines for inspecting blades for wear, damage, and potential breakage.
Steps for sharpening cutting edges while maintaining original angle and balance.
Steps for installing blades correctly with torque specifications.
To Next Page
