Toro 30626 - Page 12

12
105-7823
(Models 30630 & 30631)
1. Traction drive—to drive
forward, press the top of
the traction control pedal
forward and down; to
drive in reverse, press the
bottom of the traction
control pedal rearward
and down.
2. Warning—disengage the
power take-off (PTO)
before raising the cutting
unit(s).
3. Float the cutting unit(s)
over the ground.
4. Lower the cutting unit(s).
5. Raise the cutting unit(s).
105-7822
(Models 30626 & 30627)
Manufacturers Mark
1. Indicates the blade is identified as a part from the original
machine manufacturer.