Toro 38581 - Page 13

6.Removetheshroud(Figure25).
Figure25
1.Screw(4)3.Spark-plugwire
2.Shroud
7.Installthefueltankcap.
8.Disconnectthewirefromthesparkplug.
9.Cleanaroundthesparkplug.
10.Removethesparkplugfromthecylinderhead.
Important:Replaceacracked,fouled,or
dirtysparkplug.Donotcleantheelectrodes
becausegritenteringthecylindercandamage
theengine.
11.Setthegapontheplugto0.030inch(0.76mm)
(Figure26).
Figure26
1.Centerelectrodeinsulator3.Airgap(nottoscale)
2.Sideelectrode
12.Installthesparkplugandtightenitsecurely.
13.Connectthewiretothesparkplug.
14.Removethefueltankcap.
15.Installtheshroudwiththescrewsyouremovedin
step4.
Note:Ensurethattheupperandlowershroudst
togetherinthesidegrooves.
16.Installthefueltankcap.
17.Installthechuteseal,thedischargechute,andthe
dischargechutehandleontothesnowthrowerusing
thehardwareyouremovedinstep3.
Note:Thesmallscrewgoesthroughthesmallhole
inthechutesealatthefrontofthedischargechute
opening.
13