Toro 51593 - Converting from Vacuum to Blower; Operation; Connecting to a Power Source

3.Installthevacuumbag.
4.Adjustthestrapasneededforcomfortableoperation.
3
ConvertingfromVacuumtoBlower
Partsneededforthisprocedure:
1.Removethevacuumbagandthevacuumtubefromtheblower
housing.
2.Installtheblowertubeandthentheinletcoverontotheblower
housing.
NOTICE!Theblowerwillnotrununlessthebottominletcover
islockedinplace.
Operation
NOTICE!Thisblowerisintendedforoutdoor,residentialuseonly.
Donotuseitindoorsorforcommercialorindustrialpurposes.
ConnectingtoaPowerSource
Thepowersupplyyouusewiththisapplianceshouldbearesidential
currentdevice(RCD)withatrippingcurrentofnotmorethan30mA.
UseonlyaCEapprovedextensioncordrecommendedforoutdoor
use.Donotchangetheapplianceorextensioncordpluginanyway.
WARNING
Ifyoudonotfullyseattheextensioncordontheinletplug,orif
theplugandcorddonottrmly,thelooseplugcouldleadto
overheatingandcauseare,possiblyburningyouorothers.
•Ensurethatyoufullyseatthecordontheplug.
•Checktheconnectionregularlytoensurethatthecordis
rmlyattached.
•Donotuseaworn-outorlooseextensioncord.
ExtensionCordLengthMinimumWireGage
30m1.0mm
2
45m2.0mm
2
Note:Donotuseanextensioncordover45m.
NOTICE!Checktheextensioncordfrequentlyduringusefor
holesintheinsulation.Donotuseadamagedcord.Donotrun
thecordthroughstandingwaterorwetgrass.
Securetheextensioncordtotheblowercordusinganoverhandknot,
asshown.
4